Description TURNING POINT Masterguard Propeller Hub – 707 Kit, Honda/Johnson/Suzuki, 90-300 HP with a 4.75″ Gearcase These Turning Point’s Masterguard 707 Propeller Hub Kits are suitable for 90-300 HP Engines with a 4.75″ Gearcase. The hub system enables the end-user to economically carry a spare or different diameter/pitch propeller to suit the days skiing, fishing or cruising activities. 500 & 700 SERIES INSTALLATION KITS FEATURES Premium corrosion resistant brass splines. Eliminate hub system vibration & chatter. Reduce gear shock & engine/drive damage. Reduce prop replacement cost by up to 50%. Compatible with and upgrades competitors’ hub & prop systems. Interchangeable with Mercury Flo-Torq II, Michigan Wheel XHS, Solas Rubex hub kit systems. HUB KIT SPECIFICATIONS ENGINE BRAND SPLINES SUITS MODEL KIT SUITS ENGINE PART NUMBER HONDA 15 SPLINE NOTE: Use 707 Super Duty Kit for 200 HP Engines. BF115D, BF135, BF150, BF200 (’02-’12), BF225 (’02-’12) 707 90-300 HP Engines with a 4.75″ Gearcase 203707 JOHNSON 15 SPLINE (use Express Mach3 OS series props only) 4 STROKE: 200HP, 225HP 707 90-300 HP Engines with a 4.75″ Gearcase 203707 SUZUKI 15 SPLINE NOTE: Use 707 Super Duty Kit for 200 HP Engines DT 2 STROKE: 150 to 225HP 707 90-300 HP Engines with a 4.75″ Gearcase 203707 SUZUKI 15 SPLINE NOTE: Use 707 Super Duty Kit for 200 HP Engines (use Express Mach3 OS series props only) DT 4 STROKE: 150 to 300HP 707 90-300 HP Engines with a 4.75″ Gearcase 203707 *For prop type guide, see hustler prop options and specifications table below. *Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty. TWO (2) STEPS TO CHOOSE THE RIGHT PROPELLER HUB KIT & PROPELLER To find the correct Installation Kit: locate the HP, gearcase size, and prop shaft spline count of the outboard or sterndrive. STEP 1: Find the installation kit suitable to your engine drive shaft type listed in the table above. If the type is not listed, kindly check other turning point hub kits. STEP 2: Find and purchase the chosen propeller suitable to the installation kit (see listed propellers below). (NOTE: Propellers must be purchased seperately.) The following are the suitable propellers to this installation kit: Turning Point Aluminium 3 Blade Hustler Propeller LE Models for (90-300 HP) 202413 LE-1515 / 15.25 Dia. x 15 Pitch 202417 LE-1417 / 14.25 Dia. x 17 Pitch 202421 LE-1419 / 14.25 Dia. x 19 Pitch 202425 LE-1421 / 14.25 Dia. x 21 Pitch 202429 LE-1423 / 14.25 Dia. x 23 Pitch Turning Point Aluminium 4 Blade Hustler Propeller LE Models for (90-300 HP) 202426 LE-1515-4 / 15 Dia x 15 Pitch 202427 LE-1515-4L / 15 Dia x 15 Pitch 202430 LE-1417-4 / 14.5 Dia x 17 Pitch 202431 LE-1417-4 / 14.5 Dia x 17 Pitch 202432 LE-1419-4 / 14 Dia x 19 Pitch 202433 LE-1419-4L / 14 Dia x 19 Pitch 202434 LE-1421-4 / 14 Dia x 21 Pitch 202435 LE-1421-4L / 14 Dia x 21 Pitch Turning Point Mach3 Express 3 Blade Stainless Steel Propeller EX Models for (90-300 HP) 202813 EX-1417 / 14.25 Dia. x 17 Pitch 202815 EX-1419 / 14.25 Dia. x 19 Pitch Turning Point Mach3 Express 3 Blade Stainless Steel Propeller OS Series, Large Diameter (90-300 HP) 202900 OS-1617 / 15.6 Dia. x 17 Pitch 202902 OS-1619 / 15.6 Dia. x 19 Pitch Turning Point Mach4 Express 4 Blade Stainless Steel Propeller EX Models (90-300 HP) 202850 EX-1515-4 / 15 Dia. x 15 Pitch 202852 EX-1417-4 / 14.5 Dia. x 17 Pitch ABOUT TP’S MASTERGUARD HUBS The hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. It is also designed as a innovative one-piece glass with reinforced high-tech, shock absorbing, polymer cushion that increases flexibility and eliminates failures commonly seen in multi-part hub “sleeve and spline” designs, and pressed-in rubber hub systems. The high-flow through barrel exhaust system maximises exhaust flow increasing horsepower and top end speed. When buying a replacement propeller housing, boaters can save in costing as Turning Point offers an inventory reducing installation kits and prop housings system made to be in full line of propeller applications. With clear and easy to understand directions to make installation easy and convenient. The splines are made of premium corrosion resistant brass material. The hubs are suitable to upgrade and replace Mercury Flo-Torq II, Michigan Wheel XHS, and Solas Rubex hub kit systems.